The short version
- An installer the manufacturer allows to offer it. NDL warranties come only through contractors in good standing with that manufacturer.
- The project is registered before work starts, with the system, term and roof size, and the manufacturer accepts it.
- An approved system for your deck, slope and building. Every component comes from the manufacturer's list.
- Testing where needed: a moisture survey and cores on a recover, and fastener pull tests to set attachment. Pull-test procedures vary by manufacturer, and the manufacturer generally sends a rep to meet us on site.
- Installed to the manufacturer's published spec and details.
- The manufacturer's own inspection, and every punch-list item fixed.
- The fee is paid and the warranty is issued to the building owner.
What usually changes between a 10-year and a 20-year NDL
Each manufacturer publishes its own requirements for each term, so the spec sheet for your system has the final word. In general, longer terms ask for more:
| Item | What a longer term often requires |
|---|---|
| Membrane | A heavier membrane or more plies |
| Attachment | Tighter fastening at corners and perimeter, or an adhered system, based on wind design and pull tests |
| Flashings and edges | Manufacturer-approved edge metal, reinforced corners and specific flashing heights |
| Insulation and cover board | Approved boards, sometimes a cover board, and enough slope to drain |
| Inspection | The manufacturer's final inspection, and on some programs inspections during the job |
| Price | The manufacturer's warranty fee rises with the term; we show it as its own line in the bid |
Things that knock a roof out of a 20-year NDL
- Wet insulation left in place under a recover. That's why we survey first; see infrared moisture surveys.
- Mixed components from outside the approved system.
- Ponding. Many warranties exclude damage from water that stands too long after rain; tapered insulation and added drains fix it.
- Unapproved details at curbs, walls, pipes and edges.
- A deck that won't hold fasteners to the required values without repairs.
Which roofs can carry one?
Most single-ply and multi-ply systems we install: TPO, PVC, EPDM, modified bitumen and many built-up systems. Coating manufacturers tie their system warranties to the thickness applied; see silicone and commercial coatings. Metal roof panels and paint finishes are warranted differently; see commercial metal roofing.
After it's issued: keeping it
The warranty holds only if the owner keeps up the roof: clear drains, records of inspections, leaks reported in writing on time, and no unapproved work by other trades. See warranty inspections and how to stay covered.
How we set it up in a bid
- The term (10 or 20 years) and the system named in writing
- The manufacturer's warranty fee shown as its own line
- Testing included: moisture survey, cores and pull tests where needed, with a manufacturer rep on site for the pull tests
- A sample warranty document, so you can read the exclusions before you sign
- Our own workmanship warranty, from 10 years up to lifetime, depending on the job
Code sections and test standards are summarized in plain English from the published documents. Your building official, the manufacturer's current specification and the warranty document have the final word.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers.
General information, not legal advice. The warranty document issued for your roof controls.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.
