Snow Roofing & Exteriors logo Call (817) 733-9228
Farmers Branch, TX · Metal roofing

Metal Roofing in Farmers Branch, TX

Metal roofing in Farmers Branch, TX is mostly a wind decision: NOAA lists an EF-0 tornado that tore part of a roof off a building here in 2019 and a 78 mph wind that peeled a large part of an apartment roof off the same evening. Snow Roofing & Exteriors installs every kind of metal roof here: standing seam, stone-coated steel and metal shingles, R-panel, PBR and corrugated, all in 24 or 26 gauge with standing seam and R-panel formed on our own roll formers. Our Rhome-area team is about 40 road miles (roughly 56 minutes) away. Call (817) 733-9228.
  • Hidden screws and clean, straight lines
  • Formed on our own roll formers, right on the job
  • 24 or 26 gauge steel in many colors
  • Workmanship warranty from 10 years up to lifetime, depending on the job
Illustration of a modern farmhouse with a bronze standing seam metal roof

Farmers, factories and now a lot of roofs

Farmers Branch sits on Interstate 35E and State Highway 77 about 12 miles north of downtown Dallas. Settlers from the Peters Colony and nearby land grants arrived in the 1840s, and the Handbook of Texas says the community took the name Farmers Branch because of its rich farmland. Isaac Webb founded Webb's Chapel there in 1845, the first formal church in Dallas County. The town incorporated in April 1946, got a home-rule charter in 1956 (when it had about 800 residents), and by the mid-1970s had grown to 28,550 people with dozens of manufacturers making steel products, tile, cement and machine parts. Census estimates now show about 38,300 residents, and the city's mix of homes, apartments, offices and industrial buildings means metal roofs are part of everyday life here.

Here is how we usually match metal to what's on the ground in Farmers Branch:

PropertyWhat we usually recommend
Single-family home with a shingle roofStone-coated steel or metal shingles that read as shingle or shake from the street, or a full standing seam roof in a dark finish
Apartment or multifamily buildingStanding seam or R-panel on pitched roofs, with perimeter and edge details set for the wind, or a low-slope system where the roof is flat
Warehouse, shop or industrial buildingR-panel, PBR or corrugated, or standing seam where the owner wants hidden fasteners
Church or institutional buildingStanding seam in a custom color, or stone-coated steel to match the existing look
Garage, carport or patio coverR-panel, PBR or corrugated, or standing seam to match the house

Every kind of metal roof, not just one

Most "metal roofing" searches in Farmers Branch start with standing seam, but it isn't the only right answer. Here's what we install and where each one fits:

Metal systemWhat it looks likeWhere it fits best
Standing seamFlat pans with raised seams, fasteners hiddenFull roofs on modern, farmhouse and transitional homes; porch and bay accents
Stone-coated steelSteel with a stone granule finish shaped like shake, tile or shingleOwners who want metal's strength but a traditional look a neighborhood is used to
Metal shingles and metal tilePressed steel panels in shingle, slate or tile profilesHomes where the street view has to read as shingle, slate or tile
Copper accentsBright copper that weathers to brown, then greenBay windows, entry roofs, dormers and cupolas on traditional homes
R-panel, PBR and corrugatedRibbed panels with exposed screws and washersShops, barns, garages, pool cabanas, boat and RV covers

We don't quote prices on the web because pitch, size, tear-off and detail work move them too much. We'll give you a written number for each option that makes sense on your roof.

Commercial metal in Farmers Branch: R-panel, PBR and standing seam

Metal is usually the better answer on a commercial or multifamily roof that has already been through a wind or hail event. We form standing seam and R-panel on our own roll formers in 24 or 26 gauge and also supply PBR and corrugated, so a Farmers Branch building owner can compare systems from one contractor. Where the roof is low-slope, we check the manufacturer's minimum slope for the exact panel and seam, and where it's too flat for any steep-slope panel we say so and price the right low-slope system instead. For commercial roofs we offer 10- and 20-year NDL warranties at different prices, and we put the scope, the edge details and the warranty terms in writing. See commercial roofing for the other systems we install.

Farmers Branch's wind record

NOAA's event narratives show Farmers Branch roofs take wind seriously:

  • June 16, 2019: a brief EF-0 tornado near Valley View Lane tore part of the roof off a building (estimated 85 mph), and the same evening a 78 mph thunderstorm wind peeled a significant portion of the roof off an apartment complex along Villa Creek.
  • June 2, 2022: winds in the area between Bee Street, Valwood Parkway and Valley View Lane brought down trees, removed shingles and some roof decking from a few homes and damaged the corner roof of a church.
  • May 28, 2024: winds estimated at 80 mph in Valley Ranch.
  • May 19, 2026: a trained spotter measured a 64 mph gust.
  • January 15, 2017: 10 to 20 windows blown out of a 17-story office building near I-35 and I-635.

An EF-0 tornado, a peeled apartment roof and shingles and decking blown off homes all say the same thing: wind finds the weak edge. Metal fails at its edges and fasteners, not in the middle of the panel, so on a Farmers Branch roof we use:

  • Tighter clip and fastener spacing at the perimeter (eaves, rakes, hips and ridge), where uplift is highest, following the manufacturer's tested pattern.
  • Trim made for the panel, hemmed and cleated, instead of face-screwed loose trim that wind can catch.
  • Deck and nailing checked after tear-off, because a metal roof is only as well attached as the wood under it.
  • Closures sized to the panel at the ridge and eaves so wind-driven rain stays out.

Hail around Farmers Branch

NOAA's Storm Events Database lists 16 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of the center of Farmers Branch from 2016 through the September 2026 update, plus five reports of hail an inch or larger within about three miles. The closest big hail came with one storm:

  • June 6, 2018: 3-inch hail in Carrollton, about two miles from the center of Farmers Branch, 1.5-inch hail in Farmers Branch itself, and 2.75- to 3-inch hail near Coppell and Hebron.
  • June 11, 2023: 2.5-inch hail in Lewisville, about ten miles northwest.
  • April 21, 2017 and September 24, 2023: 2-inch hail in Richardson, about nine to ten miles east.
  • May 22, 2024: 1.75-inch hail in Lewisville.
  • August 16, 2020 and April 2, 2023: 1-inch hail in Addison, within about two miles.

Metal isn't hail-proof. Very large hail can dent steel, and some policies treat cosmetic dents differently from leaks, so read the policy before you choose. A 24- or 26-gauge panel won't crack, curl or shed granules the way shingles do. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.

Very large hail can still dent steel, but a metal roof doesn't crack, bruise or shed granules the way a shingle does, so it usually keeps shedding water after storms that end a shingle roof's life. If you want the shingle look, stone-coated steel hides small dents in its granule coating. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you.

City of Farmers Branch roof permit

Farmers Branch has a specific permit category for re-roofing. The City's Residential Dwelling Permit Fee Schedule (effective October 1, 2021) lists Re-Roofing at $150, a City fee and not our price. The City's Building Inspections & Permits page adds the rest:

  • Current codes. Since October 1, 2025 Farmers Branch has used the 2024 International Codes and the 2023 National Electrical Code.
  • Inspection windows. For occupied homes, field inspections run between 8 a.m. and 4 p.m., inspectors give about 5 to 15 minutes of notice, and an adult 18 or older has to be there to give access.
  • The contractor makes sure the work is ready. The City states that it is the contractor's responsibility to have the work ready for inspection and give inspectors access.
  • Registration. The City's guide for remodels says anyone other than the homeowner doing permitted work has to be registered as a contractor with the City. We confirm the current registration steps with Building Inspections before each job.

Whether a particular repair needs a permit depends on its scope, so we ask the City instead of guessing. Building Inspections is at 972-919-2549 (13000 William Dodson Parkway). We apply, post the permit and schedule the inspections.

For a metal roof, the City's rule that the contractor has the work ready and gives inspectors access shapes our schedule: we tear off to the deck on every metal job instead of going over old roofing, so we can fix the decking, correct the ventilation and lay high-temperature underlayment made for metal, and we book the inspection once the deck is ready to show.

Getting metal past an HOA in Farmers Branch

Many neighborhoods in Farmers Branch have an HOA, and committees mostly care about how the roof reads from the street and whether the color fits the neighborhood. Stone-coated steel and metal shingles read as shake, shingle or tile from the curb; standing seam is often approved first on porches, bays and entries. We put together the product sheet, color chip, profile drawing and impact rating so the committee can decide on the first pass. Approval is always up to your HOA.

Complex roofs need more than panels

Where a roof has hips, valleys, dormers, parapets, rooftop units or wall intersections, that's where a metal roof is won or lost. Every one of those details gets flashing bent for the panel on our brake, not caulk; valleys get a full-length valley pan; curbs and chimneys get a cricket; and walls get counterflashing that lets the panel move with the heat. We draw those details into the written spec so you can see what you're paying for.

Garages, carports and shops

We re-panel and re-roof detached garages, workshops, patio covers and RV and boat covers in R-panel, PBR or standing seam, color-matched to the main roof, and metal lead time is typically 1 to 2 weeks. Our crews also handle siding, gutters and windows, so one crew can finish the whole exterior.

Why it matters that we form our own panels

  • One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
  • 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
  • No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
  • Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
  • Every inspection comes with a free digital photo report, so you see what we see.

How a metal roof job runs with us

  1. Inspection and free digital photo report: deck, ventilation, penetrations, valleys and measurements.
  2. Written spec for each option: system, gauge, profile, color, underlayment, trim and every flashing detail.
  3. Approvals: the HOA or historic-review packet if you need one, then the permit.
  4. Tear-off and deck repair where needed, then high-temperature synthetic underlayment made for metal.
  5. Install by our own crew, with hips, ridges, eaves and penetrations detailed for the system.
  6. Final walk-through, a magnet sweep of the yard and driveway, and your warranty in writing.

Who installs metal roofs in Farmers Branch?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
  • Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
  • Our own crew, about 40 road miles (roughly 56 minutes) from Farmers Branch with our Rhome-area team.
  • Snow Roofing & Exteriors is BBB A+ rated.

Our metal work, up close

The photos on this page show our roof work up close. We never show a street or address.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing.

More in Farmers Branch: our Farmers Branch roofing page and metal roofing in Addison. Nearby: Carrollton, Coppell, Irving and our commercial roofing page.

Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Charcoal standing seam metal roof on a brick ranch home near Rhome, TX
Charcoal standing seam on a brick ranch
Dark bronze standing seam metal roof replacing shingles on a red brick ranch home near Sanger, TX
Dark standing seam replacing shingles on a brick ranch
Standing seam metal roof on a blue board-and-batten wing of a ranch estate
Standing seam on a board-and-batten wing
Close-up of a gray standing seam metal roof with matching painted vent stacks and pipe flashings
Gray standing seam with painted vent stacks and pipe flashings
Side elevation of a brick home with multiple hips in standing seam metal
Multiple hips in standing seam
Detail of a shake-to-standing-seam metal transition
Where a shake roof meets standing seam
Close view of standing seam panels at the eave of a brick ranch home
Seams running straight to the eave
Snow Roofing crew at the panel trailer beside a brick garage during a standing seam install
Our crew and panel trailer on install day

Frequently asked questions

Who installs metal roofs in Farmers Branch?

Snow Roofing & Exteriors installs standing seam, stone-coated steel, metal shingle, R-panel and PBR roofs on homes, apartments, garages, shops and commercial buildings in Farmers Branch. It is a family roofing business that goes back 75 years, owner Blake Snow has 30 years in the business, the company has completed over $80 million in roofing projects, it is BBB A+ rated, and it has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Standing seam and R-panel are formed on its own roll formers in 24 or 26 gauge. Its Rhome-area team is about 40 road miles (roughly 56 minutes) away. Call (817) 733-9228.

Do I need a permit for a metal roof in Farmers Branch?

Yes for a re-roof. Farmers Branch lists Re-Roofing as its own category in its residential permit fee schedule at $150 (schedule effective October 1, 2021), and the City says a repair's permit needs depend on its scope, so we confirm with Building Inspections at 972-919-2549.

What building code does Farmers Branch use?

Since October 1, 2025 the City has used the 2024 International Codes and the 2023 National Electrical Code. Our roofs are installed to the manufacturer's specifications and the code either way.

When does Farmers Branch inspect occupied homes?

Field inspections of occupied residential properties run between 8 a.m. and 4 p.m., and an adult 18 or older has to be present to give access. We schedule the inspection and make sure the work is ready.

Has Farmers Branch had tornado or wind damage?

Yes. NOAA lists a brief EF-0 tornado near Valley View Lane on June 16, 2019 that tore part of a roof off a building, a 78 mph wind the same evening that peeled much of an apartment roof off, and a June 2, 2022 wind that removed shingles and some decking from a few homes.

Has Farmers Branch had big hail?

NOAA lists 16 reports of hail 1.75 inches or larger within about 10 miles of Farmers Branch from 2016 through September 2026, including 3-inch hail in Carrollton, about two miles away, on June 6, 2018, and 1.5-inch hail in Farmers Branch that day.

Can you do commercial metal roofs in Farmers Branch?

Yes. We install standing seam, R-panel, PBR and corrugated, and we offer 10- and 20-year NDL warranties on commercial roofs at different prices. Where a roof is too flat for a steep-slope panel, we quote the right low-slope system.

Is standing seam the only metal option?

No. We also install stone-coated steel and metal shingles or tile for a traditional look, copper accents, and R-panel, PBR or corrugated on shops, barns and covers.

What gauge metal do you install?

24 or 26 gauge steel on every standing seam and R-panel roof. We don’t install 29 gauge on homes.

How soon can a metal roof start?

Metal lead time is typically 1 to 2 weeks, because we form standing seam and R-panel on our own roll formers. HOA approval and the permit can add time, so we start that paperwork right after you sign.

What warranty do you give on a metal roof?

A workmanship warranty from 10 years up to lifetime, depending on the job, plus the manufacturer warranty on the panel and finish, in writing.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228 snowexteriors@gmail.com