Snow Roofing & Exteriors logo Call (817) 733-9228
Addison, TX · Metal roofing

Metal Roofing in Addison, TX

Metal roofing in Addison, TX covers a town that is mostly commercial, hospitality and multifamily roofs with homes and townhomes in between. Snow Roofing & Exteriors installs every kind of metal roof here: standing seam, stone-coated steel and metal shingles, R-panel, PBR and corrugated, all in 24 or 26 gauge with standing seam and R-panel formed on our own roll formers. Our Rhome-area team is about 47 road miles (roughly 63 minutes) away. Call (817) 733-9228.
  • Hidden screws and clean, straight lines
  • Formed on our own roll formers, right on the job
  • 24 or 26 gauge steel in many colors
  • Workmanship warranty from 10 years up to lifetime, depending on the job
Illustration of a modern farmhouse with a bronze standing seam metal roof

A small town with a big roof count

Addison sits on Belt Line Road and the Dallas North Tollway about 13 miles north of downtown Dallas, mostly in Dallas County. Peters Colony families settled the area in the 1840s, and Preston and Pleasant Witt had an ox-powered gristmill on White Rock Creek by 1849. A railroad coaling station at Noell Junction in 1888 gave the place its start, and the post office, opened in 1904, took the name of first postmaster Addison Robertson. The Handbook of Texas records about 600 residents in the mid-1950s, when the town incorporated (1953) to avoid annexation by Dallas and Addison Airport was built, and 5,553 residents by 1980. The town then courted restaurants, hotels and offices, so today Addison is a small town of roughly 17,200 residents (Census estimate) with a very large daytime population and a lot of commercial, hospitality and multifamily roofs.

Addison roofs fall into a few groups, and each wants something different from metal:

PropertyWhat we usually recommend
Office, retail or restaurant buildingStanding seam or R-panel on steep or moderate slopes, or a proper low-slope system where the roof is too flat for panels
Hangar, warehouse or shopR-panel, PBR or corrugated, or standing seam where the owner wants hidden fasteners
Single-family home or townhomeStone-coated steel or metal shingles that read as shingle or shake from the street; standing seam on porches and bays
Modern remodelA full standing seam roof, usually charcoal, black or dark bronze
Garage, carport or patio coverR-panel, PBR or corrugated, or standing seam to match the main roof

Every kind of metal roof, not just one

Most "metal roofing" searches in Addison start with standing seam, but it isn't the only right answer. Here's what we install and where each one fits:

Metal systemWhat it looks likeWhere it fits best
Standing seamFlat pans with raised seams, fasteners hiddenFull roofs on modern, farmhouse and transitional homes; porch and bay accents
Stone-coated steelSteel with a stone granule finish shaped like shake, tile or shingleOwners who want metal's strength but a traditional look a neighborhood is used to
Metal shingles and metal tilePressed steel panels in shingle, slate or tile profilesHomes where the street view has to read as shingle, slate or tile
Copper accentsBright copper that weathers to brown, then greenBay windows, entry roofs, dormers and cupolas on traditional homes
R-panel, PBR and corrugatedRibbed panels with exposed screws and washersShops, barns, garages, pool cabanas, boat and RV covers

We don't quote prices on the web because pitch, size, tear-off and detail work move them too much. We'll give you a written number for each option that makes sense on your roof.

Commercial metal in Addison: R-panel, PBR and standing seam

Metal is usually the better answer on a commercial or multifamily roof that has already been through a wind or hail event. We form standing seam and R-panel on our own roll formers in 24 or 26 gauge and also supply PBR and corrugated, so a Addison building owner can compare systems from one contractor. Where the roof is low-slope, we check the manufacturer's minimum slope for the exact panel and seam, and where it's too flat for any steep-slope panel we say so and price the right low-slope system instead. For commercial roofs we offer 10- and 20-year NDL warranties at different prices, and we put the scope, the edge details and the warranty terms in writing. See commercial roofing for the other systems we install.

Addison's wind record

NOAA's event narratives for Addison and the blocks around it show wind reaching roofs, especially commercial ones:

  • May 28, 2024: a spotter reported a roof torn from a commercial building at Keller Springs Road and Midway Road, in the Addison Airport area, in the same storm that put 83 mph winds in Richardson.
  • June 9, 2019: the Addison Airport weather station reported a 58 mph gust.
  • January 2, 2017: a cell phone tower was bent over near Belt Line Road and Midway Road in Addison.
  • March 4, 2025: an amateur radio operator measured an 82 mph gust near Hebron Parkway and Josey Lane in Carrollton, and Dallas Love Field recorded 78 mph.

A roof torn off a commercial building and a bent cell tower are the same lesson: metal fails at its edges and fasteners, not in the middle of the panel. On an Addison roof we use:

  • Tighter clip and fastener spacing at the perimeter (eaves, rakes, hips and ridge), where uplift is highest, following the manufacturer's tested pattern.
  • Trim made for the panel, hemmed and cleated, instead of face-screwed loose trim that wind can catch.
  • Deck and nailing checked after tear-off, because a metal roof is only as well attached as the wood under it.
  • Closures sized to the panel at the ridge and eaves so wind-driven rain stays out.

Hail around Addison

NOAA's Storm Events Database lists 33 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of the center of Addison from 2016 through the September 2026 update. Hail an inch or larger fell within about three miles five times, the closest 1-inch hail over Addison on April 2, 2023. The big stones were mostly just outside town:

  • June 6, 2018: 3-inch hail in Carrollton about four miles away, with 2.75-inch hail near Hebron and Coppell the same afternoon.
  • April 20, 2023: 3-inch hail in Plano, about seven miles northeast.
  • June 11, 2023: 3-inch hail near Carney, about eight miles north, and 2.5-inch hail in Lewisville.
  • April 13, 2019: 2.75-inch hail near Carney, about nine miles north.
  • September 25, 2024: 2-inch hail near Shepton, about five miles north.
  • September 24, 2023 and April 27, 2026: up to 2.25-inch hail in Richardson, about eight miles east.

Metal isn't hail-proof. Very large hail can dent steel, and some policies treat cosmetic dents differently from leaks, so read the policy before you choose. A 24- or 26-gauge panel won't crack, curl or shed granules the way shingles do. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.

Very large hail can still dent steel, but a metal roof doesn't crack, bruise or shed granules the way a shingle does, so it usually keeps shedding water after storms that end a shingle roof's life. If you want the shingle look, stone-coated steel hides small dents in its granule coating. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you.

Town of Addison roof permit

Addison requires a permit to replace a roof. The Town's residential projects page lists "replacing a roof" among the work that needs one, and its FAQ says a permit is required for a re-roof shingle replacement. Here is how it works, from the Town's own pages:

  • Roof permits go by email, not the online portal. Addison's FAQ lists "Roof" among the permits that need plans-examiner review and are not available through the online portal. The Roofing Permit Application and scope of work go to [email protected].
  • Registered contractors only. Per the Town's contractor registration page, every contractor has to be registered before any project, the registration runs one year, and it requires a state ID, applicable professional credentials and proof of insurance. When the registered contractor isn't the one filing the permit, a separate contractor validation form is required for that job site.
  • Inspections are scheduled through the Town's portal, or by the inspection request line at 972-450-2885.
  • The fee is the Town's, not ours. Addison publishes a residential building fee schedule, and we read you the current roof permit fee from it before you sign instead of quoting it from memory.

Questions about a specific address go to Addison's building inspection staff at 972-450-2880 (Addison Service Center, 16801 Westgrove Drive). We register, file the application, handle validation and schedule the inspections.

For a metal roof, the email-only roof permit means the plan has to be right the first time, so we draw the panel layout, edge details and any decking replacement into the application. We tear off to the deck on every metal job instead of going over old roofing, so we can fix the decking, correct the ventilation and lay high-temperature underlayment made for metal.

Getting metal past an HOA in Addison

Many neighborhoods in Addison have an HOA, and committees mostly care about how the roof reads from the street and whether the color fits the neighborhood. Stone-coated steel and metal shingles read as shake, shingle or tile from the curb; standing seam is often approved first on porches, bays and entries. We put together the product sheet, color chip, profile drawing and impact rating so the committee can decide on the first pass. Approval is always up to your HOA.

Complex roofs need more than panels

Where a roof has hips, valleys, dormers, parapets, rooftop units or wall intersections, that's where a metal roof is won or lost. Every one of those details gets flashing bent for the panel on our brake, not caulk; valleys get a full-length valley pan; curbs and chimneys get a cricket; and walls get counterflashing that lets the panel move with the heat. We draw those details into the written spec so you can see what you're paying for.

Garages, carports and shops

We re-panel and re-roof detached garages, workshops, patio covers and RV and boat covers in R-panel, PBR or standing seam, color-matched to the main roof, and metal lead time is typically 1 to 2 weeks. Our crews also handle siding, gutters and windows, so one crew can finish the whole exterior.

Why it matters that we form our own panels

  • One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
  • 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
  • No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
  • Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
  • Every inspection comes with a free digital photo report, so you see what we see.

How a metal roof job runs with us

  1. Inspection and free digital photo report: deck, ventilation, penetrations, valleys and measurements.
  2. Written spec for each option: system, gauge, profile, color, underlayment, trim and every flashing detail.
  3. Approvals: the HOA or historic-review packet if you need one, then the permit.
  4. Tear-off and deck repair where needed, then high-temperature synthetic underlayment made for metal.
  5. Install by our own crew, with hips, ridges, eaves and penetrations detailed for the system.
  6. Final walk-through, a magnet sweep of the yard and driveway, and your warranty in writing.

Who installs metal roofs in Addison?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
  • Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
  • Our own crew, about 47 road miles (roughly 63 minutes) from Addison with our Rhome-area team.
  • Snow Roofing & Exteriors is BBB A+ rated.

Our metal work, up close

The photos on this page show our roof work up close. We never show a street or address.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing.

More in Addison: our Addison roofing page and metal roofing in Farmers Branch. Nearby: Carrollton, Plano, Richardson and our commercial roofing page.

Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Charcoal standing seam metal roof on a brick ranch home near Rhome, TX
Charcoal standing seam on a brick ranch
Dark bronze standing seam metal roof replacing shingles on a red brick ranch home near Sanger, TX
Dark standing seam replacing shingles on a brick ranch
Standing seam metal roof on a blue board-and-batten wing of a ranch estate
Standing seam on a board-and-batten wing
Close-up of a gray standing seam metal roof with matching painted vent stacks and pipe flashings
Gray standing seam with painted vent stacks and pipe flashings
Side elevation of a brick home with multiple hips in standing seam metal
Multiple hips in standing seam
Detail of a shake-to-standing-seam metal transition
Where a shake roof meets standing seam
Close view of standing seam panels at the eave of a brick ranch home
Seams running straight to the eave
Snow Roofing crew at the panel trailer beside a brick garage during a standing seam install
Our crew and panel trailer on install day

Frequently asked questions

Who installs metal roofs in Addison?

Snow Roofing & Exteriors installs standing seam, stone-coated steel, metal shingle, R-panel and PBR roofs on homes, townhomes, garages and commercial buildings in Addison. It is a family roofing business that goes back 75 years, owner Blake Snow has 30 years in the business, the company has completed over $80 million in roofing projects, it is BBB A+ rated, and it has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Standing seam and R-panel are formed on its own roll formers in 24 or 26 gauge. Its Rhome-area team is about 47 road miles (roughly 63 minutes) away. Call (817) 733-9228.

Do I need a permit for a metal roof in Addison?

Yes. The Town of Addison lists replacing a roof among the work that requires a permit, and roof permits are submitted by email with the Roofing Permit Application to [email protected] rather than through the online portal. The contractor has to be registered with the Town.

How do I check that a roofer is registered in Addison?

The Town requires every contractor to be registered before any project, with one-year registration and proof of insurance, and a validation form when the contractor isn't the one filing the permit. You can ask Addison's building inspection staff at 972-450-2880.

How are Addison roof inspections scheduled?

Through the Town's portal, or by the inspection request line at 972-450-2885. We schedule them.

Can you do commercial metal roofs in Addison?

Yes. We install standing seam, R-panel, PBR and corrugated, and we offer 10- and 20-year NDL warranties on commercial roofs at different prices. Where a roof is too flat for a steep-slope panel, we quote the right low-slope system.

Has Addison had big hail?

NOAA lists 33 reports of hail 1.75 inches or larger within about 10 miles of Addison from 2016 through September 2026, including 3-inch hail in Carrollton, about four miles away, on June 6, 2018.

Will a metal roof hold up to Addison wind?

When the edges are done right, yes. NOAA lists a roof torn from a commercial building at Keller Springs and Midway on May 28, 2024. We tighten clip and fastener spacing at the perimeter to the manufacturer's tested pattern.

Is standing seam the only metal option?

No. We also install stone-coated steel and metal shingles or tile for a traditional look, copper accents, and R-panel, PBR or corrugated on shops, barns and covers.

What gauge metal do you install?

24 or 26 gauge steel on every standing seam and R-panel roof. We don’t install 29 gauge on homes.

How soon can a metal roof start?

Metal lead time is typically 1 to 2 weeks, because we form standing seam and R-panel on our own roll formers. HOA approval and the permit can add time, so we start that paperwork right after you sign.

What warranty do you give on a metal roof?

A workmanship warranty from 10 years up to lifetime, depending on the job, plus the manufacturer warranty on the panel and finish, in writing.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228 snowexteriors@gmail.com