Snow Roofing & Exteriors logo Call (817) 733-9228
Farmers Branch, TX · Standing seam metal

Standing Seam Metal Roofing in Farmers Branch, TX

Standing seam metal roofing in Farmers Branch, TX is a wind-first choice: NOAA lists an EF-0 tornado that tore part of a roof off a building here in June 2019 and a 78 mph wind that peeled much of an apartment roof off the same evening. Standing seam gives you one panel from eave to ridge, no laps for wind-driven rain to get under, and hidden fasteners. Snow Roofing & Exteriors forms 24- or 26-gauge standing seam on our own roll formers, and our own crew installs it. Our Rhome-area team is about 40 road miles (roughly 56 minutes) away. Call (817) 733-9228.
  • Hidden screws and clean, straight lines
  • Formed on our own roll formers, right on the job
  • 24 or 26 gauge steel in many colors
  • Workmanship warranty from 10 years up to lifetime, depending on the job
Illustration of a modern farmhouse with a bronze standing seam metal roof

Where standing seam fits in Farmers Branch

Farmers Branch sits on Interstate 35E and State Highway 77 about 12 miles north of downtown Dallas. Settlers from the Peters Colony and nearby land grants arrived in the 1840s, and the Handbook of Texas says the community took the name Farmers Branch because of its rich farmland. Isaac Webb founded Webb's Chapel there in 1845, the first formal church in Dallas County. The town incorporated in April 1946, got a home-rule charter in 1956 (when it had about 800 residents), and by the mid-1970s had grown to 28,550 people with dozens of manufacturers making steel products, tile, cement and machine parts. Census estimates now show about 38,300 residents, and the city's mix of homes, apartments, offices and industrial buildings means metal roofs are part of everyday life here.

  • Single-family homes where owners are done replacing shingles after wind and hail. Dark standing seam over brick is the conversion we're asked about most.
  • Apartments and multifamily buildings where one wind event can strip a roof, and where a commercial NDL warranty (we offer 10- and 20-year at different prices) matters.
  • Shops, warehouses and churches that want a long-lived roof with hidden fasteners.
  • Accents over porches, bays and entries with a designer or Class 4 shingle main roof, the usual answer where an HOA limits full metal.

Comparing standing seam with stone-coated steel, R-panel or metal shingles? See metal roofing in Farmers Branch.

Snap-lock or mechanically seamed?

Snap-lockMechanically seamed
How the seam closesPanels snap together by handA seaming tool folds the seam closed along its length
Best onMost steep-slope house roofsLow-slope porches and wings, and very long runs
Look from the streetClean, slim seamSlightly heavier seam; same concealed fasteners

More detail: snap-lock vs. mechanical lock. We use 24 or 26 gauge steel and never 29 gauge on a home (why). We don't publish prices because size, pitch, tear-off and detail work move them too much; our standing seam cost page explains what moves the number, and you get a written price for your roof.

Farmers Branch's wind record

NOAA's event narratives show Farmers Branch roofs take wind seriously:

  • June 16, 2019: a brief EF-0 tornado near Valley View Lane tore part of the roof off a building (estimated 85 mph), and the same evening a 78 mph thunderstorm wind peeled a significant portion of the roof off an apartment complex along Villa Creek.
  • June 2, 2022: winds in the area between Bee Street, Valwood Parkway and Valley View Lane brought down trees, removed shingles and some roof decking from a few homes and damaged the corner roof of a church.
  • May 28, 2024: winds estimated at 80 mph in Valley Ranch.
  • May 19, 2026: a trained spotter measured a 64 mph gust.
  • January 15, 2017: 10 to 20 windows blown out of a 17-story office building near I-35 and I-635.

Built for Farmers Branch's wind

Standing seam handles that kind of wind well when it's installed to the manufacturer's tested system. What we do on every Farmers Branch roof:

  • Clip spacing tightened at the perimeter. Uplift is highest at the eaves, rakes, hips and ridge, so that's where the clips go closer together, per the manufacturer's pattern.
  • Hemmed panel ends and cleated trim, so there's no raw edge or loose flange for wind to get under.
  • Mechanically seamed panels on low-slope sections and where the exposure calls for the extra seam strength.
  • Deck nailing checked after tear-off. The 2022 storm removed some roof decking along with shingles on a few homes, and clips can only hold as well as the wood they're screwed into.

Low slope and transitions

On low planes we use mechanically seamed panels, so the seam is folded closed along its full length, and we check the manufacturer's minimum slope for the exact panel and seam before we quote it. Where the pitch changes (a carport tying into the house, a canopy under a taller roof, a rooftop unit curb) we bend transition flashings on our brake. If a section is too flat for any steep-slope roof, we'll tell you and quote the right low-slope system for it.

Color, finish and the street view

Charcoal, black and dark bronze are the most requested on brick, and muted grays suit commercial frontage. Lighter colors run cooler in a Texas summer. We bring real panel samples, put the exact color and finish system in writing, and include the profile drawing and product sheet in your HOA packet if you have one. See metal roof colors and finishes. Approval is up to your HOA.

What a good standing seam job looks like up close

  • One panel from eave to ridge, formed to the length of each roof plane.
  • Clips that let the panels move with the heat, so they don't oil-can or pull fasteners.
  • Bent flashings, not caulk, at walls, chimneys, valleys, skylights and pipes.
  • High-temperature underlayment made for metal, over a deck we've checked and repaired.
  • Vent piping and flues reconnected and flashed, and the work ready and accessible for the City’s inspection.

City of Farmers Branch roof permit

Farmers Branch has a specific permit category for re-roofing. The City's Residential Dwelling Permit Fee Schedule (effective October 1, 2021) lists Re-Roofing at $150, a City fee and not our price. The City's Building Inspections & Permits page adds the rest:

  • Current codes. Since October 1, 2025 Farmers Branch has used the 2024 International Codes and the 2023 National Electrical Code.
  • Inspection windows. For occupied homes, field inspections run between 8 a.m. and 4 p.m., inspectors give about 5 to 15 minutes of notice, and an adult 18 or older has to be there to give access.
  • The contractor makes sure the work is ready. The City states that it is the contractor's responsibility to have the work ready for inspection and give inspectors access.
  • Registration. The City's guide for remodels says anyone other than the homeowner doing permitted work has to be registered as a contractor with the City. We confirm the current registration steps with Building Inspections before each job.

Whether a particular repair needs a permit depends on its scope, so we ask the City instead of guessing. Building Inspections is at 972-919-2549 (13000 William Dodson Parkway). We apply, post the permit and schedule the inspections.

Hail and standing seam in Farmers Branch

NOAA's Storm Events Database lists 16 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of the center of Farmers Branch from 2016 through the September 2026 update, plus five reports of hail an inch or larger within about three miles. The closest big hail came with one storm:

  • June 6, 2018: 3-inch hail in Carrollton, about two miles from the center of Farmers Branch, 1.5-inch hail in Farmers Branch itself, and 2.75- to 3-inch hail near Coppell and Hebron.
  • June 11, 2023: 2.5-inch hail in Lewisville, about ten miles northwest.
  • April 21, 2017 and September 24, 2023: 2-inch hail in Richardson, about nine to ten miles east.
  • May 22, 2024: 1.75-inch hail in Lewisville.
  • August 16, 2020 and April 2, 2023: 1-inch hail in Addison, within about two miles.

No roof is hail-proof, and very large hail can dent steel. Standing seam doesn't crack, curl or lose granules, so it usually keeps shedding water after storms that ruin shingles. If you'd rather keep a shingle look on the main roof, we'll compare Class 4 designer shingles with full metal. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.

Why it matters that we form our own panels

  • One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
  • 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
  • No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
  • Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
  • Every inspection comes with a free digital photo report, so you see what we see.

How a metal roof job runs with us

  1. Inspection and free digital photo report: deck, ventilation, penetrations, valleys and measurements.
  2. Written spec for each option: system, gauge, profile, color, underlayment, trim and every flashing detail.
  3. Approvals: the HOA or historic-review packet if you need one, then the permit.
  4. Tear-off and deck repair where needed, then high-temperature synthetic underlayment made for metal.
  5. Install by our own crew, with hips, ridges, eaves and penetrations detailed for the system.
  6. Final walk-through, a magnet sweep of the yard and driveway, and your warranty in writing.

Who installs standing seam roofs in Farmers Branch?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
  • Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
  • Our own crew, about 40 road miles (roughly 56 minutes) from Farmers Branch with our Rhome-area team.
  • Snow Roofing & Exteriors is BBB A+ rated.

Our metal work, up close

The photos on this page show our roof work up close. We never show a street or address.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing.

More: metal roofing in Farmers Branch, our Farmers Branch roofing page, standing seam in Addison, and nearby Carrollton, Plano and Richardson.

Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Red brick ranch home with a new dark standing seam metal roof, seen from the front yard
Brick ranch after a shingle-to-standing-seam conversion
Aerial view of a composite shake roof with standing seam metal sections, installed by Snow Roofing & Exteriors
Drone view: composite shake with standing seam sections
Old asphalt shingles next to new standing seam metal panels during a roof conversion
Old shingles beside new standing seam
Gray standing seam metal roof panels running up to the ridge, with painted vent stacks
Standing seam panels and painted vents to the ridge
Standing seam metal roof seen from a backyard pool and spa
Standing seam over a pool and spa
Green standing seam metal roof and trim over the porch of a log-look siding home
Green standing seam and trim over a porch
Standing seam metal roof and gable on a tan brick ranch home
Finished standing seam gable
Roofer finishing standing seam panels at a hip on a brick garage
Finishing standing seam at a garage hip

Frequently asked questions

Who installs standing seam roofs in Farmers Branch?

Snow Roofing & Exteriors installs 24- and 26-gauge standing seam roofs, accents, carports and patio covers on homes, apartments and commercial buildings in Farmers Branch, formed on its own roll formers. It is a family roofing business that goes back 75 years, owner Blake Snow has 30 years in the business, the company has completed over $80 million in roofing projects, it is BBB A+ rated, and it has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Standing seam and R-panel are formed on its own roll formers in 24 or 26 gauge. Its Rhome-area team is about 40 road miles (roughly 56 minutes) away. Call (817) 733-9228.

Do I need a permit for a standing seam roof in Farmers Branch?

Yes for a re-roof. Farmers Branch lists Re-Roofing as its own permit category at $150 in its fee schedule effective October 1, 2021. We confirm the current requirements with Building Inspections at 972-919-2549 and pull the permit.

How do you keep standing seam on in high wind?

By following the manufacturer's tested clip pattern, with tighter spacing at the eaves, rakes, hips and ridge, hemmed panel ends, cleated trim and a deck we've checked. NOAA lists a 78 mph wind that peeled much of an apartment roof off in Farmers Branch on June 16, 2019.

Has Farmers Branch had tornado damage?

NOAA lists a brief EF-0 tornado near Valley View Lane on June 16, 2019 that tore part of a roof off a building, with estimated winds of 85 mph.

Will hail ruin a standing seam roof?

Very large hail can dent it, but steel doesn't crack, curl or lose granules, so it usually keeps shedding water. NOAA lists 3-inch hail in Carrollton, about two miles from Farmers Branch, on June 6, 2018.

What warranty can I get on a commercial standing seam roof?

We offer 10- and 20-year NDL warranties on commercial roofs at different prices, plus a workmanship warranty from 10 years up to lifetime, depending on the job. We put the terms in writing.

Snap-lock or mechanically seamed: which do I need?

Snap-lock suits most steep house roofs. Mechanically seamed panels are better for low-slope porches and wings and very long runs. We spec the right one for each roof plane.

Will hail dent a standing seam roof?

Very large hail can dent any metal roof. Steel doesn’t crack, curl or lose granules like shingles, so it usually keeps shedding water. Ask your insurer how your policy treats cosmetic dents.

What gauge metal do you install?

24 or 26 gauge steel on every standing seam and R-panel roof. We don’t install 29 gauge on homes.

How soon can a metal roof start?

Metal lead time is typically 1 to 2 weeks, because we form standing seam and R-panel on our own roll formers. HOA approval and the permit can add time, so we start that paperwork right after you sign.

What warranty do you give on a metal roof?

A workmanship warranty from 10 years up to lifetime, depending on the job, plus the manufacturer warranty on the panel and finish, in writing.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228 snowexteriors@gmail.com