Where standing seam fits in Allen
Allen is on U.S. 75 about eight miles southwest of McKinney in southwestern Collin County. A purchasing agent for the Houston and Texas Central Railway laid it out in 1870, and in 1872 it was named for Ebenezer Allen, a former Texas attorney general who promoted the railroad. It stayed a small railroad town (about 550 people in 1915) until the late 1960s. Then it took off: the Handbook of Texas records 1,940 residents in 1970, 8,314 in 1980, about 18,300 in 1990 and 43,554 in 2000. Census estimates show about 113,400 residents today, which means most of the homes in Allen were built after 1980.
Standing seam shows up on Allen homes in a few ways:
- Full roofs on two-stories whose owners have filed one hail claim too many. A dark standing seam roof over brick or stone is the conversion we're asked about most.
- Accents over porches, bays and entries with a designer or Class 4 shingle main roof, the usual answer where an HOA limits full metal.
- Modern farmhouse remodels and additions where standing seam is part of the design.
- Patio covers, cabanas and outdoor kitchens behind the house.
Comparing standing seam with stone-coated steel or metal shingles? See metal roofing in Allen.
Snap-lock or mechanically seamed?
| Snap-lock | Mechanically seamed | |
|---|---|---|
| How the seam closes | Panels snap together by hand | A seaming tool folds the seam closed along its length |
| Best on | Most steep-slope house roofs | Low-slope porches and wings, and very long runs |
| Look from the street | Clean, slim seam | Slightly heavier seam; same concealed fasteners |
More detail: snap-lock vs. mechanical lock. We use 24 or 26 gauge steel and never 29 gauge on a home (why). We don't publish prices because size, pitch, tear-off and detail work move them too much; our standing seam cost page explains what moves the number, and you get a written price for your roof.
Hail and standing seam in Allen
NOAA's Storm Events Database lists 82 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of the center of Allen from 2016 through the September 2026 update, tied with Plano for the most of any town we track, and 28 reports of hail an inch or larger within about three miles. The big ones:
- March 24, 2019: 4.5-inch hail in Allen, about three miles from the center of the city, with 3-inch hail about four miles out and 2- to 2.5-inch hail closer in.
- May 19, 2023: 2.5-inch hail about a mile from the center of Allen, with 2-inch and 1.75-inch hail nearby the same day.
- April 20, 2023: 2-inch hail about a mile from the center, the same storm that dropped 3-inch hail in Plano.
- April 11, 2016: 2-inch hail under a mile from the center, and 5.25-inch hail near Wylie about 10 miles southeast, the largest in the area.
- March 25, 2025: 2-inch hail near Forest Grove, about two miles east, and 2.25-inch hail near Parker.
No roof is hail-proof, and hail like the 4.5-inch stones of March 2019 can dent steel. What standing seam doesn't do is crack, curl or lose granules, so it usually keeps shedding water after storms that end a shingle roof. Thicker 24-gauge panels and lower-profile ribs show dents less; we'll show you both. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.
Built for Allen's wind
NOAA lists an EF-0 tornado that pulled shingles off homes along Ridgeview Drive in October 2019, a metal roof torn off a building about a mile southwest of the city in August 2020, and a home along Hedgcoxe Road that lost much of its roof in March 2025. Standing seam handles wind well when it's installed to the manufacturer's tested system. What we do on every Allen roof:
- Clip spacing tightened at the perimeter. Uplift is highest at the eaves, rakes, hips and ridge, so that's where the clips go closer together, per the manufacturer's pattern.
- Hemmed panel ends and cleated trim, so there's no raw edge or loose flange for wind to get under.
- Mechanically seamed panels on low-pitch porches and where the exposure calls for the extra seam strength.
- Deck nailing checked after tear-off, because the clips can only hold as well as the wood they're screwed into.
Getting standing seam past an Allen HOA
Almost every Allen neighborhood built since the 1980s has an HOA, and committees mostly care about how the roof reads from the street. Standing seam accents on porches and bays are often approved first; full roofs get approved more often when the color is dark and matte and the profile drawing shows a narrow rib. We put together the product sheet, color chip, profile drawing and impact rating so the committee can decide on the first pass. Approval is always up to your HOA.
Color, finish and the street view
Over Allen's brick and stone, charcoal, black and dark bronze are the colors we're asked about most; lighter grays and tans run cooler in summer. We bring real panel samples and put the exact color and finish system in writing. See metal roof colors and finishes.
What a good standing seam job looks like up close
- One panel from eave to ridge, formed to the length of each roof plane.
- Clips that let the panels move with the heat, so they don't oil-can or pull fasteners.
- Bent flashings, not caulk, at walls, chimneys, valleys, skylights and pipes.
- High-temperature underlayment made for metal, over a deck we've checked and repaired.
- An attic check after installation, with every appliance vent and flue photographed, before we sign the City’s Final Roof Installation Affidavit.
City of Allen roof permit
Allen requires a permit to re-roof a house. Re-roofing isn't on the City's list of residential work exempt from permits, and the City's fee schedule lists Re-Roofing for a single-family home, duplex or townhome at $150 (a City fee, not our price). From the City's residential permit and construction packet:
- Applied for online. Roof permits go through the City's Citizen Self-Service portal with a detailed description and location of the work. Homeowners doing their own roof fill out a Homeowner's Affidavit instead.
- Built to the manufacturer's instructions and the International Residential Code. That's the standard the roof final checks against.
- A ground-level final. The City's inspector does an exterior visual inspection from the ground.
- The attic check is on the contractor. The roofer has to inspect the attic after installation and confirm every fuel-fired appliance vent and every other vent is intact, venting outside and clear of combustibles, then upload the City's Final Roof Installation Affidavit, which carries the contractor's City of Allen registration number. The final isn't approved until it's on file.
Because the City's inspector doesn't go into the attic, that affidavit is your proof the vents and flues were put back right. We do the attic check, photograph it, sign the affidavit and give you a copy. Construction is allowed from 7 a.m. to 10 p.m., seven days a week. Questions about a specific address go to Allen Building & Permitting at 214-509-4130.
Why it matters that we form our own panels
- One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
- 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
- No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
- Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
- Every inspection comes with a free digital photo report, so you see what we see.
How a metal roof job runs with us
- Inspection and free digital photo report: deck, ventilation, penetrations, valleys and measurements.
- Written spec for each option: system, gauge, profile, color, underlayment, trim and every flashing detail.
- Approvals: the HOA or historic-review packet if you need one, then the permit.
- Tear-off and deck repair where needed, then high-temperature synthetic underlayment made for metal.
- Install by our own crew, with hips, ridges, eaves and penetrations detailed for the system.
- Final walk-through, a magnet sweep of the yard and driveway, and your warranty in writing.
Who installs standing seam roofs in Allen?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
- Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
- Our own crew, about 58 road miles (roughly 76 minutes) from Allen with our Rhome-area team.
- Snow Roofing & Exteriors is BBB A+ rated.
Our metal work, up close
The photos on this page show our roof work up close. We never show a street or address.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing.
More: metal roofing in Allen, our Allen roofing page, and nearby standing seam in Plano, Richardson and metal roofing in Frisco.
Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.








