Snow Roofing & Exteriors logo Call (817) 733-9228
Allen, TX · Metal roofing

Metal Roofing in Allen, TX

Metal roofing in Allen, TX is usually a hail decision: NOAA lists 82 reports of golf-ball-size or larger hail within about 10 miles of Allen since 2016, including 4.5-inch hail in the city in 2019. Snow Roofing & Exteriors installs every kind of metal roof here: standing seam, stone-coated steel and metal shingles for HOA streets, copper accents, and R-panel or PBR for garages and outbuildings, all in 24 or 26 gauge with standing seam and R-panel formed on our own roll formers. Our Rhome-area team is about 58 road miles (roughly 76 minutes) away. Call (817) 733-9228.
  • Hidden screws and clean, straight lines
  • Formed on our own roll formers, right on the job
  • 24 or 26 gauge steel in many colors
  • Workmanship warranty from 10 years up to lifetime, depending on the job
Illustration of a modern farmhouse with a bronze standing seam metal roof

A city built since 1980, in hail country

Allen is on U.S. 75 about eight miles southwest of McKinney in southwestern Collin County. A purchasing agent for the Houston and Texas Central Railway laid it out in 1870, and in 1872 it was named for Ebenezer Allen, a former Texas attorney general who promoted the railroad. It stayed a small railroad town (about 550 people in 1915) until the late 1960s. Then it took off: the Handbook of Texas records 1,940 residents in 1970, 8,314 in 1980, about 18,300 in 1990 and 43,554 in 2000. Census estimates show about 113,400 residents today, which means most of the homes in Allen were built after 1980.

That puts most Allen homes on their second or third roof, often after a hail claim, and almost all of them in a neighborhood with an HOA. Owners who are tired of the cycle ask which metal fits the house and the covenants:

PropertyWhat we usually recommend
1980s-90s brick two-storyStone-coated steel or metal shingles that read as shingle or shake from the curb, or a full standing seam roof in a dark finish
2000s and newer home in a strict HOAStone-coated steel or metal shingle in an approved color; standing seam on porches, bays and entries
Larger custom home on the east or north sideFull standing seam, or metal accents with a designer shingle main roof
Modern farmhouse remodelA full standing seam roof, usually charcoal, black or dark bronze
Detached garage, cabana, workshop or RV coverR-panel, PBR or corrugated, or standing seam to match the house

Every kind of metal roof, not just one

Most "metal roofing" searches in Allen start with standing seam, but it isn't the only right answer. Here's what we install and where each one fits:

Metal systemWhat it looks likeWhere it fits best
Standing seamFlat pans with raised seams, fasteners hiddenFull roofs on modern, farmhouse and transitional homes; porch and bay accents
Stone-coated steelSteel with a stone granule finish shaped like shake, tile or shingleOwners who want metal's strength but a traditional look a neighborhood is used to
Metal shingles and metal tilePressed steel panels in shingle, slate or tile profilesHomes where the street view has to read as shingle, slate or tile
Copper accentsBright copper that weathers to brown, then greenBay windows, entry roofs, dormers and cupolas on traditional homes
R-panel, PBR and corrugatedRibbed panels with exposed screws and washersShops, barns, garages, pool cabanas, boat and RV covers

We don't quote prices on the web because pitch, size, tear-off and detail work move them too much. We'll give you a written number for each option that makes sense on your roof.

Hail around Allen

NOAA's Storm Events Database lists 82 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of the center of Allen from 2016 through the September 2026 update, tied with Plano for the most of any town we track, and 28 reports of hail an inch or larger within about three miles. The big ones:

  • March 24, 2019: 4.5-inch hail in Allen, about three miles from the center of the city, with 3-inch hail about four miles out and 2- to 2.5-inch hail closer in.
  • May 19, 2023: 2.5-inch hail about a mile from the center of Allen, with 2-inch and 1.75-inch hail nearby the same day.
  • April 20, 2023: 2-inch hail about a mile from the center, the same storm that dropped 3-inch hail in Plano.
  • April 11, 2016: 2-inch hail under a mile from the center, and 5.25-inch hail near Wylie about 10 miles southeast, the largest in the area.
  • March 25, 2025: 2-inch hail near Forest Grove, about two miles east, and 2.25-inch hail near Parker.

Metal isn't hail-proof. Very large hail can dent steel, and some policies treat cosmetic dents differently from leaks, so read the policy before you choose. A 24- or 26-gauge panel won't crack, curl or shed granules the way shingles do. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.

That record is why metal comes up so often here. Very large hail can still dent steel, but a metal roof doesn't crack, bruise or shed granules the way a shingle does, so it usually keeps shedding water after storms that end a shingle roof's life. If you want the shingle look, stone-coated steel hides small dents in its granule coating. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you.

Allen's wind record

From NOAA's event narratives, wind has done real roof damage in Allen too:

  • October 20, 2019: an EF-0 tornado in west Allen, near Exchange Parkway and Ridgeview Drive, traveled roughly along Ridgeview, pulling shingles off a number of homes and blowing down fences before crossing U.S. 75.
  • August 16, 2020: part of a metal roof was torn off a commercial building about a mile southwest of the city, several homes about a mile west-northwest had roof damage, and shingle, carport and patio cover damage was reported across the city.
  • March 4, 2025: much of the roof blew off a home along Hedgcoxe Road between Iola Drive and Freeland Drive, another home lost a chimney, and an outbuilding was destroyed.
  • July 8, 2017: Allen Fire and Rescue reported multiple large trees uprooted in the city.

The metal roof torn off a building in August 2020 is a good lesson: metal fails at its edges and fasteners, not in the middle of the panel. On an Allen roof we use:

  • Tighter clip and fastener spacing at the perimeter (eaves, rakes, hips and ridge), where uplift is highest, following the manufacturer's tested pattern.
  • Trim made for the panel, hemmed and cleated, instead of face-screwed loose trim that wind can catch.
  • Deck and nailing checked after tear-off, because a metal roof is only as well attached as the wood under it.
  • Closures sized to the panel at the ridge and eaves so wind-driven rain stays out.

City of Allen roof permit

Allen requires a permit to re-roof a house. Re-roofing isn't on the City's list of residential work exempt from permits, and the City's fee schedule lists Re-Roofing for a single-family home, duplex or townhome at $150 (a City fee, not our price). From the City's residential permit and construction packet:

  • Applied for online. Roof permits go through the City's Citizen Self-Service portal with a detailed description and location of the work. Homeowners doing their own roof fill out a Homeowner's Affidavit instead.
  • Built to the manufacturer's instructions and the International Residential Code. That's the standard the roof final checks against.
  • A ground-level final. The City's inspector does an exterior visual inspection from the ground.
  • The attic check is on the contractor. The roofer has to inspect the attic after installation and confirm every fuel-fired appliance vent and every other vent is intact, venting outside and clear of combustibles, then upload the City's Final Roof Installation Affidavit, which carries the contractor's City of Allen registration number. The final isn't approved until it's on file.

Because the City's inspector doesn't go into the attic, that affidavit is your proof the vents and flues were put back right. We do the attic check, photograph it, sign the affidavit and give you a copy. Construction is allowed from 7 a.m. to 10 p.m., seven days a week. Questions about a specific address go to Allen Building & Permitting at 214-509-4130.

For a metal roof, the attic check matters more than usual, because we're removing and resetting every vent and flue boot on the roof. We tear off to the deck on every metal job instead of going over old shingles, so we can fix the decking, correct the ventilation and lay high-temperature underlayment made for metal.

Getting metal past an HOA in Allen

Many neighborhoods in Allen have an HOA, and committees mostly care about how the roof reads from the street and whether the color fits the neighborhood. Stone-coated steel and metal shingles read as shake, shingle or tile from the curb; standing seam is often approved first on porches, bays and entries. We put together the product sheet, color chip, profile drawing and impact rating so the committee can decide on the first pass. Approval is always up to your HOA.

Complex roofs need more than panels

Allen's two-story homes tend to have a lot of hips, valleys, dormers and wall intersections. That's where a metal roof is won or lost. Every one of those details gets flashing bent for the panel on our brake, not caulk; valleys get a full-length valley pan; chimneys get a cricket; and walls get counterflashing that lets the panel move with the heat. We draw those details into the written spec so you can see what you're paying for.

Garages, cabanas and outbuildings

We re-panel and re-roof detached garages, workshops, pool cabanas and RV covers in R-panel, PBR or standing seam, color-matched to the house, and metal lead time is typically 1 to 2 weeks. Our crews also handle siding, gutters and windows, so one crew can finish the whole exterior.

Why it matters that we form our own panels

  • One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
  • 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
  • No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
  • Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
  • Every inspection comes with a free digital photo report, so you see what we see.

How a metal roof job runs with us

  1. Inspection and free digital photo report: deck, ventilation, penetrations, valleys and measurements.
  2. Written spec for each option: system, gauge, profile, color, underlayment, trim and every flashing detail.
  3. Approvals: the HOA or historic-review packet if you need one, then the permit.
  4. Tear-off and deck repair where needed, then high-temperature synthetic underlayment made for metal.
  5. Install by our own crew, with hips, ridges, eaves and penetrations detailed for the system.
  6. Final walk-through, a magnet sweep of the yard and driveway, and your warranty in writing.

Who installs metal roofs in Allen?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
  • Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
  • Our own crew, about 58 road miles (roughly 76 minutes) from Allen with our Rhome-area team.
  • Snow Roofing & Exteriors is BBB A+ rated.

Our metal work, up close

The photos on this page show our roof work up close. We never show a street or address.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing.

More in Allen: metal roofing in Allen, standing seam in Allen and our Allen roofing page. Nearby: metal roofing in Plano, Frisco, Richardson, our McKinney roofing page and metal shingles vs. standing seam in Lucas and Fairview.

Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Charcoal standing seam metal roof on a brick ranch home near Rhome, TX
Charcoal standing seam on a brick ranch
Dark bronze standing seam metal roof replacing shingles on a red brick ranch home near Sanger, TX
Dark standing seam replacing shingles on a brick ranch
Standing seam metal roof on a blue board-and-batten wing of a ranch estate
Standing seam on a board-and-batten wing
Close-up of a gray standing seam metal roof with matching painted vent stacks and pipe flashings
Gray standing seam with painted vent stacks and pipe flashings
Side elevation of a brick home with multiple hips in standing seam metal
Multiple hips in standing seam
Detail of a shake-to-standing-seam metal transition
Where a shake roof meets standing seam
Close view of standing seam panels at the eave of a brick ranch home
Seams running straight to the eave
Snow Roofing crew at the panel trailer beside a brick garage during a standing seam install
Our crew and panel trailer on install day

Frequently asked questions

Who installs metal roofs in Allen?

Snow Roofing & Exteriors installs standing seam, stone-coated steel, metal shingle, copper accent, R-panel and PBR roofs on homes, garages, cabanas and shops in Allen. It is a family roofing business that goes back 75 years, owner Blake Snow has 30 years in the business, the company has completed over $80 million in roofing projects, it is BBB A+ rated, and it has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Standing seam and R-panel are formed on its own roll formers in 24 or 26 gauge. Its Rhome-area team is about 58 road miles (roughly 76 minutes) away. Call (817) 733-9228.

Do I need a permit for a metal roof in Allen?

Yes. Re-roofing isn't on Allen's list of exempt work. The permit is applied for online through the City's Citizen Self-Service portal, and the City's fee schedule lists Re-Roofing for a single-family home at $150.

What is Allen’s Final Roof Installation Affidavit?

A City form the roofer signs and uploads before the roof final is approved. It states the roof was installed to the manufacturer's instructions and the code, and that the contractor checked the attic and found every fuel-fired appliance vent and other vent intact, venting outside and clear of combustibles. We give you a copy.

Does Allen inspect my attic?

The City's final is an exterior visual inspection from the ground. The attic check is the contractor's job, backed by the signed affidavit, so we photograph the vents and flues before we sign it.

Has Allen had big hail?

Yes. NOAA lists 82 reports of hail 1.75 inches or larger within about 10 miles from 2016 through September 2026, including 4.5-inch hail in Allen on March 24, 2019 and 2.5-inch hail about a mile from the center on May 19, 2023.

Will my HOA allow a metal roof?

Many allow stone-coated steel or metal shingles that read as shingle from the street, and many approve standing seam accents. We prepare the product sheet, color chip and profile drawing. Approval is up to your HOA.

Will a metal roof hold up to Allen wind?

When the edges are done right, yes. NOAA lists an EF-0 tornado in west Allen in October 2019 that pulled shingles off homes, and part of a metal roof torn off a building in August 2020. We tighten clip and fastener spacing at the perimeter to the manufacturer's tested pattern.

Is standing seam the only metal option?

No. We also install stone-coated steel and metal shingles or tile for a traditional look, copper accents, and R-panel, PBR or corrugated on shops, barns and covers.

What gauge metal do you install?

24 or 26 gauge steel on every standing seam and R-panel roof. We don’t install 29 gauge on homes.

How soon can a metal roof start?

Metal lead time is typically 1 to 2 weeks, because we form standing seam and R-panel on our own roll formers. HOA approval and the permit can add time, so we start that paperwork right after you sign.

What warranty do you give on a metal roof?

A workmanship warranty from 10 years up to lifetime, depending on the job, plus the manufacturer warranty on the panel and finish, in writing.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228 snowexteriors@gmail.com