Where standing seam fits in Richardson
Richardson sits on U.S. 75 about 14 miles north of downtown Dallas, mostly in Dallas County with a smaller piece in Collin County. The Houston and Texas Central Railroad laid out the town in 1873, and it stayed a cotton town of a few hundred people for decades. Then Collins Radio and Texas Instruments arrived after World War II. The Handbook of Texas records about 1,300 residents in 1952 and 16,810 by 1960, as additions like Richardson Heights replaced the cotton fields. A second boom came in the 1980s, when telecommunications firms built along Central Expressway and Richardson became known as the "Telecom Corridor." Census estimates show about 118,500 residents today.
Standing seam shows up on Richardson homes in a few ways:
- Mid-century ranches and modern homes with long, low rooflines. Standing seam's straight vertical lines suit them, and a mechanically seamed panel handles the shallow pitch.
- Full roofs on 1980s and later two-stories where owners are done replacing shingles after hail. Dark standing seam over brick is the conversion we're asked about most.
- Accents over porches, bays and entries with a designer or Class 4 shingle main roof, the usual answer where an HOA limits full metal.
- Carports, breezeways and patio covers tied into the house.
Comparing standing seam with stone-coated steel or metal shingles? See metal roofing in Richardson.
Snap-lock or mechanically seamed?
| Snap-lock | Mechanically seamed | |
|---|---|---|
| How the seam closes | Panels snap together by hand | A seaming tool folds the seam closed along its length |
| Best on | Most steep-slope house roofs | Low-slope porches and wings, and very long runs |
| Look from the street | Clean, slim seam | Slightly heavier seam; same concealed fasteners |
More detail: snap-lock vs. mechanical lock. We use 24 or 26 gauge steel and never 29 gauge on a home (why). We don't publish prices because size, pitch, tear-off and detail work move them too much; our standing seam cost page explains what moves the number, and you get a written price for your roof.
Low pitch is where standing seam earns its keep
Shingles need enough slope to shed water. On a 1950s ranch with a shallow main roof, or a mid-century modern with nearly flat sections, they wear fast and leak at the laps. Standing seam has no laps in the field: every panel runs eave to ridge in one piece. On the low planes we use mechanically seamed panels, so the seam is folded closed along its full length, and we check the manufacturer's minimum slope for the exact panel and seam before we quote it. Where the pitch changes (a carport tying into the house, a low porch under a taller roof) we bend transition flashings on our brake so water from the steeper roof doesn't flood the flatter one. If a section is too flat for any steep-slope roof, we'll tell you and quote the right low-slope system for it.
Built for Richardson's wind
NOAA lists an 83 mph gust measured at Methodist Richardson on May 28, 2024, with a National Weather Service survey finding winds up to 90 mph across part of the city, and 77 mph gusts lasting six minutes at UT Dallas in March 2019. Standing seam handles that kind of wind well when it's installed to the manufacturer's tested system. What we do on every Richardson roof:
- Clip spacing tightened at the perimeter. Uplift is highest at the eaves, rakes, hips and ridge, so that's where the clips go closer together, per the manufacturer's pattern.
- Hemmed panel ends and cleated trim, so there's no raw edge or loose flange for wind to get under. Wide mid-century overhangs get extra attention, because wind gets under them from below.
- Mechanically seamed panels on low-pitch sections and where the exposure calls for the extra seam strength.
- Deck nailing checked after tear-off, because the clips can only hold as well as the wood they're screwed into.
Color, finish and the street view
On mid-century homes, charcoal, dark bronze and muted grays keep the low profile the architects intended; on brick two-stories, black and charcoal are the most requested. Lighter colors run cooler in a Texas summer. We bring real panel samples, put the exact color and finish system in writing, and include the profile drawing and product sheet in your HOA packet if you have one. See metal roof colors and finishes. Approval is up to your HOA.
What a good standing seam job looks like up close
- One panel from eave to ridge, formed to the length of each roof plane.
- Clips that let the panels move with the heat, so they don't oil-can or pull fasteners.
- Bent flashings, not caulk, at walls, chimneys, valleys, skylights and pipes.
- High-temperature underlayment made for metal, over a deck we've checked and repaired.
- Vent piping and flues reconnected and flashed, and any decking we replace ready for the City’s deck inspection.
City of Richardson roof permit
Richardson draws its permit line by the size of the job. The City's roof repair and replacement page says a permit is required for any roof replacement, recovering or repair that exceeds 25% of the total roof area, so a full re-roof always needs one. The rest of the rules, from the City's own pages:
- Approved and posted first. The permit has to be approved and posted at the property before any work starts.
- Two inspections when there's decking. An inspection is required when the roof deck is installed (if the job includes decking) and a final inspection when the roof is complete.
- Registered contractors only. Per the City's contractor registration page, every contractor has to be registered before a permit is issued; registration runs one year. You can check any roofer against the City's Registered Contractors List before you sign.
- Current codes. Richardson has adopted the 2021 International Codes, and the permit exists, in the City's words, to make sure the proper codes are followed.
Inspections are run twice a day, per the City's building inspection FAQ, so a deck inspection doesn't usually hold a crew up for long. Questions about a specific address go to Richardson Building Inspection at 972-744-4180. We register, apply, post the permit and schedule the inspections.
Hail and standing seam in Richardson
NOAA's Storm Events Database lists 48 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of the center of Richardson from 2016 through the September 2026 update, and 22 reports of hail an inch or larger within about three miles. The ones that matter most:
- September 24, 2023: 2.25-inch hail in Richardson about a mile from the center of the city, with 2-inch and 1.75-inch hail two to three miles south the same evening.
- April 20, 2023: 3-inch hail in Plano, about four and a half miles north.
- April 21, 2017: 2-inch hail in Richardson, about a mile and a half from the center.
- April 11, 2016: 2.5-inch hail in Plano about three and a half miles north, and 4.25-inch hail near Wylie, the largest within 10 miles.
- April 27, 2026: 1.75-inch hail about a mile and a quarter from the center of Richardson, with 1.25-inch hail at several spots across the city, the most recent golf-ball-size report.
No roof is hail-proof, and very large hail can dent steel. Standing seam doesn't crack, curl or lose granules, so it usually keeps shedding water after storms that ruin shingles. If you'd rather keep a shingle look on the main roof, we'll compare Class 4 designer shingles with full metal. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.
Why it matters that we form our own panels
- One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
- 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
- No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
- Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
- Every inspection comes with a free digital photo report, so you see what we see.
How a metal roof job runs with us
- Inspection and free digital photo report: deck, ventilation, penetrations, valleys and measurements.
- Written spec for each option: system, gauge, profile, color, underlayment, trim and every flashing detail.
- Approvals: the HOA or historic-review packet if you need one, then the permit.
- Tear-off and deck repair where needed, then high-temperature synthetic underlayment made for metal.
- Install by our own crew, with hips, ridges, eaves and penetrations detailed for the system.
- Final walk-through, a magnet sweep of the yard and driveway, and your warranty in writing.
Who installs standing seam roofs in Richardson?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
- Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
- Our own crew, about 51 road miles (roughly 68 minutes) from Richardson with our Rhome-area team.
- Snow Roofing & Exteriors is BBB A+ rated.
Our metal work, up close
The photos on this page show our roof work up close. We never show a street or address.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing.
More: metal roofing in Richardson, our Richardson roofing page, and nearby standing seam in Plano, Allen and Carrollton.
Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.








