Two kinds of Dallas warehouse roof
| Building | Typical roof | Usual options |
|---|---|---|
| Tilt-wall or block, low slope behind parapets | TPO, built-up or mod bit, often a recover over an older roof | Repair, coating, recover where allowed, or tear-off and TPO |
| Metal building system | R-panel, PBR or standing seam | Re-screw, coat, retrofit or re-panel in 24/26 gauge formed in-house |
Find the water before pricing the roof
We walk the roof, fly a drone for photos of areas that are hard to reach safely, and run drone thermal (infrared) scans that help show where water has gotten under the surface. On a big flat roof, the thermal scan shows where to cut, and core cuts confirm whether the insulation is wet and how many roofs are already on the building. Under the 2021 IBC reroofing rules (Section 1512), a new roof generally can't be laid over an existing roof that is water-soaked or deteriorated, or over one that already has two or more layers. A moisture survey and a core cut tell us which applies.
| What we find | Usual answer |
|---|---|
| Sound roof, leaks at curbs, drains and edges | Targeted repairs and a maintenance plan |
| Aging surface, dry insulation | Silicone or acrylic restoration |
| Scattered wet areas | Replace wet insulation, then coat or recover where code allows |
| Widespread wet insulation or two existing roofs | Tear-off, tapered insulation, new TPO or PVC |
Things that matter on Dallas warehouses
- Drainage: ponding at interior drains and along tilt-wall parapets; tapered insulation and crickets fix it
- Insurer requirements: if your carrier requires a specific approved roof assembly, send us its requirements with the bid request and we'll build the spec to it
- Rooftop equipment: curbs, exhaust fans and skylights are where most leaks start
- Operations: work phased around docks, racking and tenants, dried in daily
Dallas code and permits
The City of Dallas adopted the 2021 International Building Code with local amendments effective May 12, 2023 (Ordinance 32421), and its existing-building code (2021 IEBC with Dallas amendments) took effect June 13, 2022. Dallas requires a re-roof permit for replacing large areas of a roof or an entire roof, and structural repairs to rafters or joists need a building permit. Properties in historic or conservation districts have extra requirements for exterior work, and a designated landmark can need city review before its roof material changes. We do historic-district work and are permitted to. We check the address early, prepare samples and product data when review is required, and pull the permit.
Hail and wind
| Date | What NOAA logged within about 10 miles of central Dallas |
|---|---|
| June 2, 2017 | 2.5-inch hail near New Hope, the largest in the period |
| October 20, 2019 | Tornadoes across north Dallas |
| June 12, 2023 | 2-inch hail near Elam and near Balch Springs |
Source: NOAA NCEI Storm Events Database. NOAA lists 12 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of central Dallas from 2016 through September 2026, and 4 tornado reports. Dallas is large, so storms on its edges fall outside that circle. A report shows where hail was seen, not whether a given roof was damaged.
We document the damage with photos and measurements and can be on the roof when your adjuster inspects. We don't adjust or negotiate claims; you work the claim with your insurance company. Texas law requires you to pay your deductible, and we never waive or rebate it. In Texas you generally have 1 year from the date of loss to file; check your policy.
How we run a Dallas job from our Rhome office
- Inspection, drone flight and photo report scheduled as one visit. Every inspection comes with a free digital photo report, so you see what we see.
- Materials staged and crews scheduled in planned blocks, so the roof isn't left open between trips
- One point of contact for the owner, manager or committee
- Leak and storm calls answered 24/7 at (817) 733-9228
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. Both 10-year and 20-year manufacturer NDL (no-dollar-limit) warranties are available on commercial jobs. The price depends on which term you choose, and the manufacturer issues an NDL warranty only after its own inspection. We form standing seam and R-panel/PBR in 24 or 26 gauge on our own roll formers, cut to the measured length of each run. Metal lead time is typically 1 to 2 weeks. We send certificates of insurance before work starts; tell us your requirements with the bid request.
Statewide guide: warehouse roofing. Other cities: Fort Worth · Denton.
Dallas building types: warehouses · churches · HOAs · apartments · mini storage · strip malls. Back to roofing in Dallas or commercial roofing.
Commercial warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, plus both 10-year and 20-year NDL (no-dollar-limit) manufacturer warranties (the price depends on which NDL term you choose). Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.
