Dallas building types we roof
Warehouses
Big open TPO and metal roofs, re-screws, retrofits, phased work around docks.
Warehouses →Churches
Sanctuaries, halls and gyms, with committee-ready reports and work around services.
Churches →HOAs and condos
Community-wide inspections and side-by-side bids for boards.
HOAs and condos →Apartments
Occupied buildings, phased by building, with resident notices.
Apartments →Mini storage
Long metal runs, door-line leaks and coatings.
Mini storage →Strip malls
Tenant-by-tenant leak tracing and phased re-roofs.
Strip malls →Which commercial roof fits which building
| System | Where it usually fits | What to watch |
|---|---|---|
| TPO | Offices, retail, warehouses and schools with open low-slope roofs | Welded seams and flashings at curbs, parapets and drains |
| PVC | Restaurants and roofs with grease or chemical exhaust | Keep grease contained; detail the kitchen curbs |
| Modified bitumen / built-up | Older buildings, heavy foot traffic, multi-ply redundancy | Layers already on the deck; ponding |
| Coatings | Sound roofs with dry insulation | Wet insulation has to come out first |
| Metal | Pitched roofs, mansards, metal buildings, retrofits over old flat roofs | Fastener and panel choice; one-piece runs from our roll formers |
Not sure? Our multi-option bids price three to five systems side by side, and our TPO vs PVC and coating vs replacement guides explain the trade-offs.
Repair, restore or replace
We walk the roof, fly a drone for photos of areas that are hard to reach safely, and run drone thermal (infrared) scans that help show where water has gotten under the surface. Every inspection comes with a free digital photo report, so you see what we see. Where it matters we take core cuts to see whether the insulation is wet, because that one answer decides most jobs. Under the 2021 IBC reroofing rules (Section 1512), a new roof generally can't be laid over an existing roof that is water-soaked or deteriorated, or over one that already has two or more layers. A moisture survey and a core cut tell us which applies.
- Repair when leaks are at details and the field is sound
- Restore with a coating when the membrane is aging but the insulation is dry. We have hands-on experience with coating systems from American WeatherStar (we're an American WeatherStar Approved Contractor), Carlisle and Tropical Roofing Products, plus EpoxyFlex, our own private-label coating, and we apply every major brand.
- Recover over one existing roof where the code allows
- Replace when the insulation is wet across the roof or there are already two roofs
Metal from our own roll formers
We form standing seam and R-panel/PBR in 24 or 26 gauge on our own roll formers, cut to the measured length of each run. Metal lead time is typically 1 to 2 weeks. That matters on Dallas mansards, metal buildings and retrofits over old flat roofs: one panel from eave to ridge, no end laps.
Dallas permits
The City of Dallas adopted the 2021 International Building Code with local amendments effective May 12, 2023 (Ordinance 32421), and its existing-building code (2021 IEBC with Dallas amendments) took effect June 13, 2022. Dallas requires a re-roof permit for replacing large areas of a roof or an entire roof, and structural repairs to rafters or joists need a building permit. Properties in historic or conservation districts have extra requirements for exterior work. We do historic-district work and are permitted to. We check the address early and pull the permit.
Hail in Dallas
| Date | What NOAA logged within about 10 miles of central Dallas |
|---|---|
| June 2, 2017 | 2.5-inch hail near New Hope, the largest in the period |
| October 20, 2019 | Tornadoes across north Dallas |
| June 12, 2023 | 2-inch hail near Elam and near Balch Springs |
Source: NOAA NCEI Storm Events Database. NOAA lists 12 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of central Dallas from 2016 through September 2026, and 4 tornado reports. Dallas is large, so storms on its edges fall outside that circle. A report shows where hail was seen, not whether a given roof was damaged.
We document the damage with photos and measurements and can be on the roof when your adjuster inspects. We don't adjust or negotiate claims; you work the claim with your insurance company. Texas law requires you to pay your deductible, and we never waive or rebate it. In Texas you generally have 1 year from the date of loss to file; check your policy. See commercial hail claims.
Why owners call us
Owner Blake Snow brings 30 years of commercial and industrial roofing, including casino properties on the Mississippi Gulf Coast such as the Imperial Palace job in 2006, right after Hurricane Katrina, and full exterior and interior rehabs on national-brand hotel properties around the DFW Metroplex. We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. Both 10-year and 20-year manufacturer NDL (no-dollar-limit) warranties are available on commercial jobs. The price depends on which term you choose, and the manufacturer issues an NDL warranty only after its own inspection. We offer same-day response in almost every case, and we answer leak and storm calls 24/7 at (817) 733-9228. We send certificates of insurance before work starts; tell us your requirements with the bid request.
Nearby hubs: Fort Worth · Arlington · Denton. Back to commercial roofing or roofing in Dallas.
Commercial warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, plus both 10-year and 20-year NDL (no-dollar-limit) manufacturer warranties (the price depends on which NDL term you choose). Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.
