Where standing seam fits in Addison
Addison sits on Belt Line Road and the Dallas North Tollway about 13 miles north of downtown Dallas, mostly in Dallas County. Peters Colony families settled the area in the 1840s, and Preston and Pleasant Witt had an ox-powered gristmill on White Rock Creek by 1849. A railroad coaling station at Noell Junction in 1888 gave the place its start, and the post office, opened in 1904, took the name of first postmaster Addison Robertson. The Handbook of Texas records about 600 residents in the mid-1950s, when the town incorporated (1953) to avoid annexation by Dallas and Addison Airport was built, and 5,553 residents by 1980. The town then courted restaurants, hotels and offices, so today Addison is a small town of roughly 17,200 residents (Census estimate) with a very large daytime population and a lot of commercial, hospitality and multifamily roofs.
- Offices, retail and restaurants with pitched or mansard roofs where the owner wants a clean, long-lived metal finish and a roof that carries a commercial NDL warranty (we offer 10- and 20-year NDL warranties at different prices).
- Townhomes and single-family homes that have been through a hail claim and want to stop replacing shingles. Dark standing seam over brick is the conversion we're asked about most.
- Accents over porches, bays and entries with a designer or Class 4 shingle main roof, the usual answer where an HOA limits full metal.
- Canopies, carports and patio covers tied into the building.
Comparing standing seam with stone-coated steel, R-panel or metal shingles? See metal roofing in Addison.
Snap-lock or mechanically seamed?
| Snap-lock | Mechanically seamed | |
|---|---|---|
| How the seam closes | Panels snap together by hand | A seaming tool folds the seam closed along its length |
| Best on | Most steep-slope house roofs | Low-slope porches and wings, and very long runs |
| Look from the street | Clean, slim seam | Slightly heavier seam; same concealed fasteners |
More detail: snap-lock vs. mechanical lock. We use 24 or 26 gauge steel and never 29 gauge on a home (why). We don't publish prices because size, pitch, tear-off and detail work move them too much; our standing seam cost page explains what moves the number, and you get a written price for your roof.
Low slope is where details decide everything
Commercial and multifamily buildings often have lower pitches than houses. Standing seam has no laps in the field, so it handles lower slopes well when the panel and seam are the right ones. On low planes we use mechanically seamed panels, so the seam is folded closed along its full length, and we check the manufacturer's minimum slope for the exact panel and seam before we quote. Where the pitch changes (a canopy tying into a taller roof, a parapet wall, a rooftop unit curb) we bend transition flashings and curb details on our brake. If a section is too flat for any steep-slope roof, we'll tell you and quote the right low-slope system for it.
Addison's wind record
NOAA's event narratives for Addison and the blocks around it show wind reaching roofs, especially commercial ones:
- May 28, 2024: a spotter reported a roof torn from a commercial building at Keller Springs Road and Midway Road, in the Addison Airport area, in the same storm that put 83 mph winds in Richardson.
- June 9, 2019: the Addison Airport weather station reported a 58 mph gust.
- January 2, 2017: a cell phone tower was bent over near Belt Line Road and Midway Road in Addison.
- March 4, 2025: an amateur radio operator measured an 82 mph gust near Hebron Parkway and Josey Lane in Carrollton, and Dallas Love Field recorded 78 mph.
Standing seam handles that kind of wind well when it's installed to the manufacturer's tested system. What we do on every Addison roof:
- Clip spacing tightened at the perimeter. Uplift is highest at the eaves, rakes, hips and ridge, so that's where the clips go closer together, per the manufacturer's pattern.
- Hemmed panel ends and cleated trim, so there's no raw edge or loose flange for wind to get under.
- Mechanically seamed panels on low-slope sections and where the exposure calls for the extra seam strength.
- Deck nailing checked after tear-off, because the clips can only hold as well as the wood or deck they're screwed into.
Color, finish and the street view
Charcoal, black and dark bronze are the most requested on brick and stone, and muted grays and bronze suit commercial frontage. Lighter colors run cooler in a Texas summer. We bring real panel samples, put the exact color and finish system in writing, and include the profile drawing and product sheet in your HOA or owner-association packet if you have one. See metal roof colors and finishes. Approval is up to your association.
What a good standing seam job looks like up close
- One panel from eave to ridge, formed to the length of each roof plane.
- Clips that let the panels move with the heat, so they don't oil-can or pull fasteners.
- Bent flashings, not caulk, at walls, chimneys, valleys, skylights and pipes.
- High-temperature underlayment made for metal, over a deck we've checked and repaired.
- Vent piping and flues reconnected and flashed, and any decking we replace drawn into the permit application.
Town of Addison roof permit
Addison requires a permit to replace a roof. The Town's residential projects page lists "replacing a roof" among the work that needs one, and its FAQ says a permit is required for a re-roof shingle replacement. Here is how it works, from the Town's own pages:
- Roof permits go by email, not the online portal. Addison's FAQ lists "Roof" among the permits that need plans-examiner review and are not available through the online portal. The Roofing Permit Application and scope of work go to [email protected].
- Registered contractors only. Per the Town's contractor registration page, every contractor has to be registered before any project, the registration runs one year, and it requires a state ID, applicable professional credentials and proof of insurance. When the registered contractor isn't the one filing the permit, a separate contractor validation form is required for that job site.
- Inspections are scheduled through the Town's portal, or by the inspection request line at 972-450-2885.
- The fee is the Town's, not ours. Addison publishes a residential building fee schedule, and we read you the current roof permit fee from it before you sign instead of quoting it from memory.
Questions about a specific address go to Addison's building inspection staff at 972-450-2880 (Addison Service Center, 16801 Westgrove Drive). We register, file the application, handle validation and schedule the inspections.
Hail and standing seam in Addison
NOAA's Storm Events Database lists 33 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of the center of Addison from 2016 through the September 2026 update. Hail an inch or larger fell within about three miles five times, the closest 1-inch hail over Addison on April 2, 2023. The big stones were mostly just outside town:
- June 6, 2018: 3-inch hail in Carrollton about four miles away, with 2.75-inch hail near Hebron and Coppell the same afternoon.
- April 20, 2023: 3-inch hail in Plano, about seven miles northeast.
- June 11, 2023: 3-inch hail near Carney, about eight miles north, and 2.5-inch hail in Lewisville.
- April 13, 2019: 2.75-inch hail near Carney, about nine miles north.
- September 25, 2024: 2-inch hail near Shepton, about five miles north.
- September 24, 2023 and April 27, 2026: up to 2.25-inch hail in Richardson, about eight miles east.
No roof is hail-proof, and very large hail can dent steel. Standing seam doesn't crack, curl or lose granules, so it usually keeps shedding water after storms that ruin shingles. If you'd rather keep a shingle look on the main roof, we'll compare Class 4 designer shingles with full metal. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.
Why it matters that we form our own panels
- One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
- 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
- No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
- Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
- Every inspection comes with a free digital photo report, so you see what we see.
How a metal roof job runs with us
- Inspection and free digital photo report: deck, ventilation, penetrations, valleys and measurements.
- Written spec for each option: system, gauge, profile, color, underlayment, trim and every flashing detail.
- Approvals: the HOA or historic-review packet if you need one, then the permit.
- Tear-off and deck repair where needed, then high-temperature synthetic underlayment made for metal.
- Install by our own crew, with hips, ridges, eaves and penetrations detailed for the system.
- Final walk-through, a magnet sweep of the yard and driveway, and your warranty in writing.
Who installs standing seam roofs in Addison?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
- Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
- Our own crew, about 47 road miles (roughly 63 minutes) from Addison with our Rhome-area team.
- Snow Roofing & Exteriors is BBB A+ rated.
Our metal work, up close
The photos on this page show our roof work up close. We never show a street or address.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing.
More: metal roofing in Addison, our Addison roofing page, standing seam in Farmers Branch, and nearby Plano, Carrollton and Richardson.
Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.








